What are the torque specs on the Stark?

From the EX and MX 1.2 manuals (N·m)

Front end and handlebar

• front axle (lock bolt) — 35, axle clamps — 15
• front caliper — 25
• phone dock (holds the handlebar) — 30
• hand brake master cylinder, clamp — 6
• throttle — 2.5, throttle clip — 3, control switch — 2.5
• brake hose holder on the fork — 5, front fender — 8, number plate — 5

Frame and rear suspension

• swingarm (pivot) — 45, swingarm pivot pinch bolt — 25
• shock, top and bottom — 40
• pull rods — 60
• rocker: reverse nut — 20, main pivot — 60, lock nut — 60, pivot caps — 5
• side panels — top 20, bottom 30
• footpeg pin — 20, skid plate — 15
• side stand: bracket — 20, leg — 35
• VCU: side bolts — 2, center bolts — 55

Rear and brakes

• rear axle — 80
• rear sprocket bolts — 35
• brake disc bolts — 14
• foot brake master cylinder — 10, pedal pivot — 5
• chain slider — 5

Spoiler: rear center — 10, sides — 20, front — 5, carbon — 3.

Titanium fasteners use the same values and are checked after every ride.

From owners' experience: triple clamps — bottom 13–14, top 17; handlebar — 30. Gearbox: drain bolt 15, check bolt 5, filler plug 5. Kayaba fork: cartridge cap 29, bottom bolt 55, oil per leg 328 ml (295–370).

Engraving on the triple clamps (no torque for the clamps was found in official Stark documents): bottom — 17, top — 20, handlebar clamp on the top one — 25. The chat's consensus is 15 for the bottom clamp; whether to follow the engraving for the top clamp and bar clamp is still debated.